You have no items in your shopping cart.

Pro-1200W Whistler 1200 Watt Power Inverter

Quick Description
Pro-1200W Whistler 12 Volt 1200 Watt Modified Sine Wave Power Inverter
SKU: Pro-1200W

Closeout pricing - no returns, only exchange or store credit within 30 days of purchase

Features of the Pro-1200W Whistler Power Inverter: 

  • Full Output Power - Other inverters have reduced output over time.
  • 3 AC Outlets - 1 USB Port
  • Maximum Continous Power - 1200 watts
  • Maximum Surge Capability (Peak Power) - 2400 watts*
  • No Load Current Draw - <1.0A
  • Wave Form - Modified Sine Wave
  • Operating Input Voltage Range - 11-15+0.5 volts DC
  • Mountable
  • High Surge
  • Overload Indicator
  • Thermostat Controlled Cooling Fan
  • Digital Battery Volt/Watt Meter - Monitors input volts and output watts
  • Remote Operation Jack
  • Ground Fault Sensing

*Under certain conditions your Pro-1200W inverter may provide up to 2 times the continuous rating for a brief period.

Electronic Circuit Protection

  • Overload Protection – Inverter will automatically shut down if load exceeds inverter rating.
  • Smart Surge Control - Inverter will attempt to start loads above the continuous rating for up to 10 seconds.
  • Voltage Protection - Whenever the input exceeds 15 volts DC or is less than 10 volts, the inverter will automatically shutdown.
  • Short Circuit Protection - Automatically shuts down until short circuit is removed.
  • Thermal Cutoff - Automatically shuts down if internal temperature exceeds safe design parameters.

120 Amp Power Requirement - at rated output

Unit Specifications:

= 8.9"L x 7.4"W x 3.54"H
Weight = 5.42 lbs
Warranty = 2 Years

When the Pro-1200W and the battery are set up within three feet of each other, use a minimum of #4 gauge wire to make the connections. Within four to six feet, use a minimum of #2 gauge wire. At distances between six feet to ten feet, use #0 gauge wire.