You have no items in your shopping cart.

C160 Yandina Two Bank Battery Combiner, 160A

$175.00
$127.00
Quick Description
C160 Yandina Two Bank Battery Combiner, 160A
Manufacturer: Yandina
Availability: In stock
SKU: C160

The Yandina Combiner 160 has replaced the Yandina C150 battery combiner. The Yandina C160 is a voltage-sensing relay (13.3 volts) which connects two batteries together when either is receiving a charge. When the charging ceases, the relay opens so that each battery operates independently. Supplemental battery banks can be added by using an additional combiner for each bank. You never have to worry about switching to "both" when your engine is running and forgetting to switch back to save your starting battery from discharge when you stop.

Features

  • 160 amps continuous rating, 400 amps closing current (2 seconds), 200 amps for 5 minutes
  • Suitable for alternators up to 250 amps, up to 18 volts. Smaller charging sources may be able to use the Combiner 100
  • Waterproof, will operate submerged, but select a dry location
  • No voltage drop so batteries reach full charge
  • Electronic thermal monitoring with shutdown and auto restart
  • Minimal wasted power, no heat sink or cooling required
  • Can be used on alternators with internal regulators
  • No special wiring for alternators with external sense
  • Simple basic installation, two battery wires and ground
  • Green LED indicates when combined
  • Red LED indicates thermal overload shutdown
  • Draws no current when batteries are not being charged
  • Draws less than 250 milliamps when charging is in progress
  • Optional external remote control for off, automatic, on
  • Remote ON can be used to parallel banks for assisted engine starting
  • Withstands ambient temperature to over 175 F for exposed or engine compartment mounting
  • No diodes to burn out if accidentally shorted
  • Voltage regulator feature to limit voltage to safe level for sealed AGM type batteries
  • Made in the USA